opuscamper.com.au
10
SETTING UP YOUR
Air OPUS® CAMPER
Once you have positioned & leveled your
Air OPUS® on flat ground (leveling wedges
may be required - not supplied), engage the
handbrake & disconnect hitch, wiring & chains
from tow vehicle.
S
TEP 1
If roof rack is fitted, remove D Clips and
unlatch the 2 retaining clips. Once rack
is free push up until the gas struts take
the weight. From the other side of the
camper pull roof rack into vertical
position and secure upright with D
clips through mounting point.
STEP 5
S
TEP 2
S
TEP 3
S
TEP 4
Using the leg winder supplied, gently lower
corner steady legs until each touches the ground
with enough pressure to stop any rocking.
If you have a drop down spare wheel set up, please
adhere to these safety requirements. Unclip the
spare wheel carrier and lower it down gently to
the ground, taking care to support the weight of
the spare wheel carrier so that it does not swing
free and fall.
Raise or lower the jockey wheel to level your
Air OPUS® lengthways.
Initial Steps
IMPORTANT
Corner support legs are only to
support the Air OPUS® NOT to be
used to level or lift.
Summary of Contents for Air OPUS OP2
Page 38: ...opuscamper com au 36 NOTES...