CP80-4 ; CP90-4
Ref. 1887-SU-01-H
Page 41
SubSamplingROI2
Subsampling mode allows to transfer only the even lines of the ROI or ROIs.
The option is selected for ROI1 by writing
‘On’ in the entry ‘SubSamplingROI1’.
The option is selected for ROI2 by writing ‘On’ in the entry ‘SubSamplingROI2’.
Streaming has to be stopped before changing these modes.
Vertical offsets and heights of the 2 ROIs are defined in the entries
‘ROI1_OffsetY’ a,d ‘ROI2_OffsetY’.
When ‘DualROIMode’ is ‘On’, the entry ‘Height’ is reserved and is automatically
calculated by the camera.
If dual ROI mode is activated, each ROI can be configured with or without
subsampling mode.
Send Pattern Frame
When ‘On’, send a pattern frame with the following values :
0,1,2,3,…,255,0,1,2,3,…
1,2,3,4,
5,…,255,0,1,2,3…
…
255,0,1,2,3,….,255,0,1,2,3,…
0,1,2,3,…,255,0,1,2,3,…
1,2,3,4,5,…,255,0,1,2,3…
…
SensorGain
Allows to set 3 different gains : x1, x1.5, x2.
AddCounterInformation
When ‘Yes’, add a 16-bits counter (that increases for every sent frame) within
the frame (first 2 pixels).
Correction
When ‘None’, no correction is applied to the frame.
When ‘FPN’, a fixed pattern noise correction is applied to the frame.
To use the FPN and/or PRNU correction you must have a camera firmware version >= 12.0.
Let's talk about a sensor with the following resolution:
Summary of Contents for CP80-4-M/C-500
Page 1: ...CamPerform CP80 4 M C 500 CP90 4 M C 500 CoaxPress Camera User Manual Ref 1887 SU 01 H...
Page 2: ......
Page 6: ...CP80 4 CP90 4 Ref 1887 SU 01 H Page 4 SNr 1887 ST xxx 1897 ST xxx...
Page 29: ...CP80 4 CP90 4 Ref 1887 SU 01 H Page 27 Mechanical Dimensions CP80 4 Model F Mount Lens CM...
