CR Series
Ref. 1830-SU-02-N
Page 26
Power Supply Input / Power Connector
The cameras are supplied by a 12 Volt DC power source which is
delivered by the camera power supply. When connecting the power
supply, the camera is immediately operating and ready for data transfer.
Remark:
Please use always the power supply that is foreseen for the camera.
When the camera shall be supplied by another power source please
contact first Optronis GmbH.
Power-LED
During operation of the camera the power-LED glues green. If this is not
the case please make sure, that the camera is supplied correctly by the
camera power supply.
GigE Connector
The GigE Connector is used to communicate with a Laptop (PC). Please
use Cat 6 Patchcable between camera and PC.
GigE Communication-LEDs
Both LEDs glue green, when a GigE connection to the PC will be
established. The LED 1 (upper side) blinks, when a communication to the
PC will be performed as e.g. during data transfer.
Trigger / Sync Connector (Aux.)
4
3
2
1
1: Sync In
3: GND
2: Trig In
4: Sync Out
Summary of Contents for CamRecord CR Series
