CP90-25P-M/C-72
Ref. 1896-SU-01-D
Page 13
Indicator Lamp (LED)
State
Indication
No power
Off
System booting
Solid orange
Powered, but nothing connected
(only for power over power connector)
Slow pulse red
Link detection in progress,
PoCXP active
Fast flash green
Linkt detection in progress,
PoCXP not in use
Fast flash orange
Camera / Grabber incompatible,
PoCXP active
Slow flash alternate red / green
Camera / Grabber incompatible,
PoCXP not in use
Slow flash alternate red / orange
Camera connected, but no data being
transferred
Slow pulse green
Camera connected, waiting for event
(e.g. trigger, exposure pulse)
Slow pulse orange
Camera connected, transferring
frames
Solid green
Error during data transfer
500ms red pulse
System error
Fast flash red
Camera is in calibration mode, when all LEDs are flashing slowly.
Calibration mode is directly after start up and can last about 10 seconds.
CoaxPress Data Channels
To operate the camera, all 4 CoaxPress Channels have to be used. Channel 1
is Master link. Channel 2, Channel 3 and Channel 4 are Extension links.
Channel 1 uses Power over CoaxPress (PoCXP). Speeds of the Downlink are
6,25Gbit/s.
