background image

Edition of

FSU211.411

26.04.2010

Version 1.0

Page 8 of 10

FSU211

7.5 Adjust Horizontally (Adjust Offset X)

The shown image can be horizontally shifted by use of main menu entry 

„Adjust Offset X“

. Move the

star to this entry and activate the function by pressing button 

Select

. Now, the horizontal image position

can be changed by use of the buttons 

Up/Left/-

 and 

Down/Right/+

. If the shown image no more

changes, you have reached the left or right end position.

7.6 Adjust Vertically (Adjust Offset Y)

The shown image can be vertically shifted by use of main menu entry 

„Adjust Offset Y“

. Move the star

to this entry and activate the function by pressing button 

Select

. Now, the vertical image position can

be changed by use of the buttons 

Up/Left/-

 and 

Down/Right/+

. If the shown image no more changes,

you have reached the upper or lower end position.

7.7 Adjust Width

The image width can be adjusted by use of main menu entry 

„Adjust Width“

. Move the star to this entry

and activate the function by pressing button 

Select

. Now, the image width can be adjusted by use of

the buttons 

Up/Left/-

 and 

Down/Right/+

. If the shown image no more changes, the minimum or maxi-

mum possible width is reached.

7.8 Adjust Height

The image height can be adjusted by use of main menu entry 

„Adjust Height“

. Move the star to this

entry and activate the function by pressing button 

Select

. Now, the image height can be adjusted by

use of the buttons 

Up/Left/-

 and 

Down/Right/+

. If the shown image no more changes, the minimum or

maximum possible height is reached.

7.9 Change Orientation

The shown image can be rotated and mirrored by use of main menu entry 

„Change Orientation“

. Move

the star to this entry and activate the function by pressing button 

Select

. Now, you can select between

four possible orientations by use of the buttons 

Up/Left/-

 and 

Down/Right/+

.

Summary of Contents for FSU211











Reviews: