-
8
-
2 Installation / Interfaces
Please install the M12 device socket onto the lower left and the cable connection onto the upper left position
of the CT box.
Plug the PROFIBUS-DP-V1 interface into the intended plug at the CT which is right next to the display.
Push down the PROFIBUS-DP-V1 interface and adjust it with the supplied screws M3x5 within the electronic
box.
Please connect the device socket with the screw terminal at the PROFIBUS-DP-V1 interface (table).
The optris CT mainboard is operated with +8 to +36 VDC supply voltage.
Wire color M12
Profibus-
Board
Meaning
1 Green
A
Data Minus
2 Brown
VCC
VP
3 Red
B
Data Plus
4 Blue
GND
DGND
5 Gray
-
-
