optris LaserSight, Operator'S Manual

Page: 19 / 44

optris LS – E2006-01-A
17
If the Tamb-function is activated, the current set Tamb-value can be easily
displayed as follows:
Λ
⇒ Toggle between Emissivity and Tamb in lower display
If, in addition, a thermocouple probe is connected, the lower display will toggle
between Emissivity ,
t/c probe temperature
and Tamb value .
[
►
Thermocouple Probe]
Reset
With this function the unit can be set back to the factory default values
[
►
Factory Default Setting] .
2. Menu ⇒
II
⇒ 3 or 4 1) x
I
⇒ RES ⇒
II
⇒ RES flashes ⇒
II
⇒ R
ESET
⇒
I
⇒
HOLD
⇒
Trigger
⇒
Measure mode
1) depends on the status of Tamb function
The stored values in the data logger will not be deleted with the reset function.