Electrical Installation
69
-
4.7.5
Alarms
All alarms (alarm 1, alarm 2, output channel 1 and 2 if used as alarm output) have a fixed
hysteresis of 2 K
.
The CTlaser has the following Alarm features:
Output channel 1 and 2 [channel 2 on LT/ G5/ P7 only]
To activate, the according output channel has to be switched into digital mode. For this purpose the software
CompactConnect is required.
Visual alarms
These alarms will cause a change of the color of the LCD display and will also change the status of the
optional relays interface. In addition the Alarm 2 can be used as open collector output at pin
AL2
on the
mainboard
[24 V/ 50 mA]
.
The alarms are defined as follows by factory default:
Summary of Contents for CTlaser 05M
