optris CSmicro 2W2M Series, Operator'S Manual

Page: 41 / 45

optris CSmicro – E2011-08-B
39
► Cove a part of the surface of the measuring object with a black, flat paint with an emissivity of 0,98. Adjust
the emissivity of your infrared thermometer to 0,98 and take the temperature of the colored surface.
Afterwards, determine the temperature of a directly adjacent area and modify the emissivity until the
measured value corresponds to the temperature of the colored surface.
CAUTION: On all three methods the object temperature must be different from ambient temperature.
Characteristic Emissivities
In case none of the methods mentioned above help to determine the emissivity you may use the emissivity
tables
► Appendix A and B . These are average values, only. The actual emissivity of a material depends
on the following factors:
 temperature
 measuring angle
 geometry of the surface
 thickness of the material

constitution of the surface (polished, oxidized, rough, sandblast)
 spectral range of the measurement
 transmissivity (e.g. with thin films)