Shenzhen Optostar Optoelectronics Co., Ltd.
A-14,Haide Building, Nanxin Road Nanshan District,Shenzhen,P.R.China
Email:[email protected] 0086-755-26400198/0086-0755-26400288 Fax:0086-755-26411001
1
OP-8000-6U/2.5U/1U Series DWDM Rack mounted EDFA
Manual
Notes
1. Pay attention to the Interface of Fiber Cable, if not, it will affect product performance.
2. When using -48V DC power supply, do not reverse polarity power supply (products supporting the power line: black line 0V / ground, blue line -
48V power supply)
。
3. When the device is working, do not stare into the optical ports, to avoid damage to the eyes.
4. Device input optical power level should be within the reception range of the device (see product specific indicators index book or installation
manual).
5. Please keep the optical interface device clean, and Install the protective cover when you don
’t use it, in order to avoid falling into the dust.
6. Do not let any object get into the device, and liquid penetrate either, so as to avoid damage to the equipment, and as far as possible to avoid the
use in the following environments:
direct sunlight or high temperature baking where source
drastic changes in temperature environment
dusty or humid place
Strong electric or magnetic fields
corrosive gases, flammable gas or chemical fumes filled the place
7. When the device is working properly, please do not open the case; if faulty, please refer to Chapter 4 :Common Troubles for processing. If still not
resolved, please contact us.
8. If you encounter the following circumstances, please disconnect the device power immediately, and contact us to solve it:
equipment drenched by rain or liquid enters
equipment dropped or the casing is damaged
device emitting a scorched flavor
device is not working
9. When the device is ready to deliver, all parameters have been adjusted, Do not attempt to change the settings or components mobilize board.
EDFA output power is an invisible laser radiation, do not look directly at the amplifier operates its connector end faces, avoiding eye and
skin burns.
1.Equipment Structure and Function Description
1.1 Equipment components
Equipment Overview
This manual is for a 19-inch rack-type erbium-doped fiber amplifier (EDFA-BA) equipment use. The equipment is mainly used in the case of some
long-distance high speed communications, and improve the line into the fiber optical power.
Equipment components
Erbium-doped fiber amplifier power equipment front panel as shown:
. Front View
Rack LED
indicator
Management Interface
RJ45,RS232
EDFA Card
indicator
EDFA
input and
output
EDFA
monitoring
PA
Front View
Rack LED
indicator
Management Interface
RJ45,RS232
EDFA Card
indicator
EDFA input
and output
EDFA
monitoring
Red/Blue Input
BA
Front View
and Output
