English 35
USER CONTROLS
Note:
Password default value is “000000” (first time).
Always keep the password in your files. If the password is forgotten or lost, please contact your local autho
-
rized service center.
Remote Setting
IR function: When this function is “Off”, the projector cannot be operated by the remote control.
Remote code: 00~99, default code (common code): 00
HDBaseT Control
The projector will automatically detect the signal from HDBaseT transmitter supplied. Choose “HDBaseT” to
activate Direct Power mode.
PIP-PBP Module
Version: Show PIP-PBP module software version.
•
Reset: Reset the PIP-PBP module.
•
USB Upgrade: Upgrade the PIP-PBP module software.
•
HDMI EQ: Set PIP-PBP module HDMI port EQ value.
•
Information Hide
On: Choose “On” to hide the info message.
•
Off: Choose “Off” to show the “info” message.
•
Information
Display the projector information for model name, SNID, source, resolution, software version, aspect ratio, SSI
Hours, IP Address and Network Status on the screen.
When HDBaseT control is ON, 12v trigger output signal will always be ON, even if the
projector is on Standby mode.
•
•
Signal Power On & HDBaseT Standby
On: Choose “On” to enable Signal Power On.
•
Off: Choose “Off” to disable Signal Power On.
•
To access Signal Power On and HDBaseT Standby menu -- with projector on press the following buttons (in order):
Power > Up >Down> Menu.
HDBaseT Standby
On: Choose “On” to enable HDBaseT Standby.
•
Off: Choose “Off” to disable HDBaseT Standby.
•
Signal Power On
Summary of Contents for ZU610T
Page 1: ...User s Manual DLP Projector ...
Page 49: ...www optoma com ...
