Optoma ZU510T-B User Manual Download Page 41

Page: 41 / 49

English 41

APPENDICES

Crestron RoomView Control Tool

Crestron RoomView™ provides a central monitoring station for 250+ control systems on a single Ethernet network

(more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView

monitors each projector, including projector’s online status, system power, lamp life, network setting and hardware

faults, plus any custom attribute as defined by the Administrator.
The Administrator can add, delete, or edit room information, contact information and events, which are logged auto

matically by the software for all users. (Operation UI as following image)

Note:

Crestron RoomView function support is dependent on models.

When using RS232 or LAN control commands to power on the

projector, there will be a feedback delay of 6 to 10 seconds.

Main Screen

Edit Room

On the “Edit Room” page, enter the IP Address (or hostname) as shown on the projector’s on-screen display

(OSD) menu, and “02” for IPID, “41794” for the reserved Crestron control port.

About Crestron RoomView™ setting and command method, please access below website to get RoomView™

User Guide and more information:

http://www.crestron.com

Summary of Contents for ZU510T-B


















































Search results

Summary of Contents for ZU510T-B

Reviews:

Related manuals for ZU510T-B

Brands by name

Popular brands

Optoma ZU510T-B, User Manual

Search results

Summary of Contents for ZU510T-B

Reviews:

Related manuals for ZU510T-B

Brands by name

Popular brands