Optoma X343e, User Manual

Page: 51 / 99

English
51
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Information
Regulatory
Serial Number
Source
Resolution 00x00
Refresh Rate 0.00Hz
Display Mode
Power mode
(Standby)
Lamp Hours
Bright 0 hr
Eco 0 hr
Dynamic 0 hr
Eco+ 0 hr
Total
Projector ID 00~99
Filter Usage
Hours
Brightness
Mode
FW Version
System
MCU
Notee:
‡
The “Lamp Reset” in OSD will only reset both Lamp Hours in OSD and Lamp Hours in service mode.
The Projection Hours in service mode will not be reset.
‡
Each display mode can be adjusted and saved the value.
‡
In 3D timing mode, the zoom/edge mask will be disabled to prevent from image break.
‡
The available menu options vary depending on the model type.
Display menu
Display image settings menu
Display Mode (Data mode)
There are many factory presets optimized for various types of images.
‡
Presentation : This mode is suitable for showing PowerPoint presentations when the projector is
connected to the PC.
‡
Bright : Maximum brightness from PC input.
‡
Cinema : Select this mode for home theater.
‡
Game : Select this mode to increase the brightness and response time level for enjoying video games.
‡
sRGB : Standardized accurate color.
‡
DICOM SIM. : This mode can project a monochrome medical image such as an X ray radiography,
MRI, etc.
‡
User : Memorize user’s settings.
‡
3D : To experience the 3D effect, you need to have 3D glasses. Make sure your PC/portable device
has a 120 Hz signal output quad buffered graphics card and a 3D Player installed.