English
46
MAINTENANCE
Replacing the lamp (continued)
3
4
7
8
2
5
1
6
Procedure:
1.
Switch off the power to the projector by pressing the “ ” button on the projector keypad or the “
”
button on the remote control.
2.
Allow the projector to cool down for at least 30 minutes.
3.
Disconnect the power cord.
4.
Push down firmly on the middle of the top cover to unlock the latch. 1
5.
Open the top cover. 2
6.
Loosen the 2 screws on the lamp cover. 3
7.
Remove the lamp cover. 4
8.
Loosen the screw on the lamp module. 5
9.
Lift up the lamp handle. 6
10. Remove the lamp cord. 7
11. Remove the lamp module carefully. 8
12. To replace the lamp module, reverse the previous steps.
13. Turn on the projector and reset the lamp timer.
14. Lamp Reset: (i) Press "Menu"
(ii) Select "Setup"
(iii) Select "Lamp Settings"
(iv) Select "Lamp
Reset"
(v) Select "Yes".