20
Lamp Change Instructions - 50 inches
Warnings for replacing the internal lamp
1. Warning: Turn off the unit and unplug it before replacing the lamp.
2. Warning: Do not attempt to replace the lamp immediately after the display is turned off. The high
temperature of the lamp could cause serious injury. Allow the lamp to cool down at least two hours
after turning off the display before changing the lamp.
3. Warning: Do not remove the lamp except to replace it. Careless treatment can cause injury or fire.
4. Warning: When replacing the lamp, make sure that no screws or other foreign metal objects fall
into the display’s interior as such items may cause fire or electrical shock.
5. Warning: Do not touch the lamp element as it may break and cause serious burns or injuries.
For owners of the 50-inches display, please follow the instructions below when replacing the internal
lamp.
Lamp Change Instructions of 50-inch display
Unscrew and remove the lamp module’s
protective cover.
Remove the front decorative cover.
Loosen the three screws on the lamp
unit and pull the lamp module out. (Note:
These screws may be loosened but
cannot be removed from the unit.)
Replace the protective cover and tighten
the screws.
Loosen the three screws on the lamp unit and
pull the lamp module out. (Note: These screws
may be loosened but cannot be removed from
the unit.
Replace the front decorative cover.
Please make sure that the power is properly turned off before continuing.
