59
Install
To install the device
Please install the device on the flat site
by using the simple stand and foot
packaged together with the device.
1.
To install the simple stand
Screw M3 screws (accessory) into the
installing hole of the device as
following picture.
Memo:
•
There are 3 stages in the installing
hole of the stand. Please adjust the
position of holes.
2.
To install falling-proofing wire to
simple stand
Like left picture, please install the
falling-proof wire to one of simple
stands.
Notice:
•
Please watch out the length,
strength and materials of the
falling-proof wire.
3.
To install foot
Install 2 foots into the base side of the
device as the left picture.
4.
To install the device onto flat site
5.
To install the falling-proofing
wire to the site
In procedure 2, please install the
falling-proofing wire to sites.
Memo:
•
Please follow the instruction of metal
materials of other devices when
using them.
Step 10: To install the device onto the site
Installing hole
M3 screw
(accessory)
Simple stand
