Optoma PCT-101, User Manual

Page: 3 / 62

Roll Type PCT User Manual
3
PRECAUTION
•
Assembly or disassembly of Roll type PCT product should be only performed by professional installers
.
•
Roll type PCT Product is an indoor use only product, long-term exposure of the sunlight or in humid environment might damage the Roll type PCT
.
•
Roll type PCT Product should be installed away from fire source
.
•
Roll type PCT is not water repellent. Installation of PCT should be away from water leaking source
.
• Roll type PCT installation should be 30cm away from the power switch and 50cm away from transformer box to prevent interference .
•
Ensure that any cables extending across the floor to your Roll type PCT Product are properly bundled and marked to avoid a trip hazard
.
•
Do not stand (or allow children to stand) on a chair to touch the surface of your Roll type PCT Product
.
•
Do not climb (or allow children to climb) on Roll type PCT Product. Climbing on the interactive roll type PCT could result in personal injury or product damage
.
• You must connect the USB cable that came with your Roll type PCT Product to a computer. For extending USB cable length over 5m, a certified active
extension USB cable is required. In addition, the USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA
and/or UL Mark(s) for CAS/UL 60950. This is for operating safety and to avoid damage to the Roll type PCT Product.