background image

English  35

USER CONTROLS

Note:

 

Password default value is “000000” (first time). 

Always keep the password in your files. If the password is forgotten or lost, please contact your local autho

-

rized service center.

 

Remote Setting

IR function: When this function is “Off”, the projector cannot be operated by the remote control. 

 

y

Remote code: 00~99, default code (common code): 00

 

y

HDBaseT Control

The projector will automatically detect the signal from HDBaseT transmitter supplied. Choose “HDBaseT” to 

activate Direct Power mode.

PIP-PBP Module

Version: Show PIP-PBP module software version.

 

Reset: Reset the PIP-PBP module.

 

USB Upgrade: Upgrade the PIP-PBP module software.

 

HDMI EQ: Set PIP-PBP module HDMI port EQ value.

 

Information Hide

On: Choose “On” to hide the info message.

 

Off: Choose “Off” to show the “info” message.

 

Information

Display the projector information for model name, SNID, source, resolution, software version, aspect ratio, SSI 

Hours, IP Address and Network Status on the screen.

When HDBaseT control is ON, 12v trigger output signal will always be ON, even if the 

projector is on Standby mode.

 

 

Summary of Contents for Optoma ZU510T-W


















































Reviews: