3
2
NuForce STA200 Power Amplifier
SETTING UP YOUR AUDIO SYSTEM
This section guides you through the steps for setting up an audio system with the STA200 and the WDC200.
Connecting the Power Cord
IMPORTANT!
Before connecting the STA200 to an electrical outlet, make sure you have selected
the correct voltage that matches the local voltage.
Connect the power cord to the STA200 and AC outlet.
Connecting the Optoma NuForce WDC200 Wireless DAC
To connect to the WDC200, refer to the illustration below.
1
2
2
Note:
•
Make sure all devices are turned off before setting them up.
•
Make sure the right and left channels, and also the polarity of the speaker cables (usually indicated by red and
black colours) are all connected correctly.
•
The WDC200 can also be powered by its own external power adapter, instead of from the STA200’s DC output
with the umbilical cord.
Optoma NuForce
WDC-200 Wireless
DAC
Speaker
Speaker
