© Optoma
Issue 2.1 July 25, 2018
68
Settings:
0 to VPos (varies according to the Vactive, PiP Height and the PiP rules)
Default:
0
6.4.2.7.4
PiP Size
Selects the size of the PiP within the output pixel space. The first three selections are provided for
ease of use. If one of these selections is chosen, the software automatically sizes the PiP. If the last
choice is selected, the user can manually size the PiP by using the PiP-Width and PiP-Height settings
6.4.2.7.5
PiP Width
This setting defines the PiP’s width. This is enabled only if the PiP size “Free W/H” is selected.
Settings:
0 to PiP Width (varies according to the Hactive, PiP width and the PiP rules)
Default:
0
6.4.2.7.6
PiP Height
This setting defines the PiP’s height. This is enabled only if the PiP size “Free W/H” is selected.
Settings:
0 to PiP height (varies according to the Vactive, PiP height and the PiP rules)
Default:
0
6.4.2.8
PIP PTZ
This menu provides settings to zoom and shrink the PiP image, pan horizontally and tilt vertically within
the image. PTZ can be switched on or off and the settings can be saved per input channel or globally,
i.e. if applied globally the same PTZ settings are applied when switching input channels or changing the
input mode. The Zoom setting allows zooming into the image or shrink it.
The PTZ and Overscan functions are disabled if the main input resolution is more than 2048x1080p
Resolutions for which the PTZ and Overscan are disabled are: 1920x1200, 2560x1600, 3840,2160 and
4096x2160.
6.4.2.8.1
PTZ Enable
PTZ needs to be turned on before the other functions are enabled.
Settings:
On/Off
Default:
Off
6.4.2.8.2
PTZ Setting
This setting determines whether the PTZ values are applied on the selected input, or globally
Settings:
Per Input / Globally / Per Input per Mode
Default:
Per Input
6.4.2.8.3
Pan