Optoma HD39Darbee User Manual Download Page 52

Page: 52 / 56

English

ADDITIONAL INFORMATION

LED lightning messages

Message

Power LED

Temp-LED

Lamp-LED

(Red)

(Green or Blue)

(Red)

Standby state

(Input power cord)

Steady light

Power on (Warming)

Flashing

(0.5 sec off /

0.5 sec on)

Power on and Lamp

lighting

Steady light

Power off (Cooling)

Flashing

(0.5 sec off /

0.5 sec light). Back

to red steady light

when cooling fan

turns off.

Quick Resume (100

secs)

Flashing

(0.25 sec off /

0.25 sec light)

Error (Lamp failure)

Flashing

Steady light

Error (Fan failure)

Flashing

Error (Over temp.)

Flashing

Steady light

Power off:

Power Off

Power Off?

Press power key again.

Lamp warning:

Warning

Lamp Warning

Lamp life exceeded.

Temperature warning:

Warning

TEMPERATURE TOO HIGH

Please:

1. Make sure air in and outlets are not blocked.

2. Make sure the environment temperature is under 45 degree C.

If the problem persists in spite of the above.

Please contact a service center for repair.

Summary of Contents for HD39Darbee

























































Search results

Summary of Contents for HD39Darbee

Reviews:

Related manuals for HD39Darbee

Brands by name

Popular brands

Optoma HD39Darbee, User Manual

Search results

Summary of Contents for HD39Darbee

Reviews:

Related manuals for HD39Darbee

Brands by name

Popular brands