English 35
USING THE PROJECTOR
Setup power settings menu
Direct Power On
Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the “Power” key on the projector keypad or on the remote control.
Signal Power On
Choose “On” to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the “Power” key on the projector Keypad or on the remote control.
Notee:
If the “Signal Power On” option is turned “On”, the power consumption of the projector in standby mode will
be over 3W.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Sleep Timer (min)
Configure the sleep timer.
Sleep Timer (min)e:
Sets the countdown timer interval. The countdown timer will start, with or without
a signal being sent to the projector. The projector will automatically power off when the countdown has
finished (in minutes).
Notee:
The Sleep Timer is reset every time when the projector is powered off.
Always One:
Check to set the sleep timer always on.
Quick Resume
Set the quick resume setting.
One:
If the projector is accidentally turned off, this feature allows the projector to be instantly powered
on again, if selected within a period of 100 seconds.
Offe:
The fan will start cooling the system after 10 seconds when user turns off the projector.
USB Power
Set the USB power settings.
One:
The projector is always powered on by a USB power source.
Offe:
The USB Power function is off.
Autoe:
The projector is automatically powered on by a USB power source.
Setup security menu
Security
Enable this function to prompt for a password before using the projector.
One:
Choose “On” to use security verification when the turning on the projector.
Offe:
Choose “Off” to be able to switch on the projector without password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
Notee:
The default password is “1234”.
Summary of Contents for HD39Darbee
Page 1: ...User manual DLP Projector R G 2 ...
Page 56: ...www optoma com ...
