2
E
nglish
Usage Notice
Precautions
Please follow all warnings, precautions, and maintenance
procedures as recommended in this user’s guide.
Warning-
Do not look into the lens. The bright light may cause
eye injury.
Warning-
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
Warning-
To prevent the risk of electric shock, do not open or
disassemble the product.
Warning-
Please allow the unit to cool down before changing the
lamp; carefully follow the lamp replacement instruc-
tions listed under “ Replacing the lamp.”
Warning-
This product self-detects the life cycle of the lamp and
will display a warning message when the lamp is
about to expire. Be sure to replace the lamp when it
disaplays warning messages.
Warning-
After installing a new lamp, reset the lamp life using
the onscreen menu.
Warning-
Before turning off the product, follow the cooling fan
to run for several minutes.
Warning-
Turn on the projector first and then select the signal
sources.
Warning-
When the lamp reaches the end of its life, it will burn
out and may make a loud “popping” sound. If this
occurs, the projector will not turn back on until the
lamp module has been replaced. To replace the lamp,
follow the procedures listed under “Replacing the
Lamp.”
