GT750
Confidential
5-7
5-3-2 USB Driver Upgrade
Procedure
1. Set-up
(1) Insert one side of the VGA cable into the
debug board and connect it to PC by
USB cable.
Note:-The VGA cable is special,the PN is
42.00200G004.
-The position of fixture’s pin as right picture
shown.
(2) Insert another side of the VGA cable and
power cable into projector.
(3) Press "power button" and power on the
projector.
2.
Execute Program
(1) "Found New Hardware Wiszard" picture will
appear on the screen.
(2) Select "Install from a list or specific
location (Advanced)".
(3) Click "Next".
(1)
(3)
(2)