Optoma GT1090hdr User Manual Download

Page: 23 / 74

English 23

USING THE PROJECTOR

Powering on / off the projector

Geometric

Mode

Correction

PIP/PBP

Off

AV Mute

ENTER

Source

Volume

D Zoom

Info.

VGA

S-Video

HDMI1

HDMI2

HDMI3

Format Freeze

Remote

All

HDBaseT

Video

DVI

BNC

YPbPr

DisplayPort

Re-Sync

Menu

Lens cap

Powering on

Remove the lens cap.

Securely connect the power lead and signal/source cable. When connected, the Power LED will turn

red.

Turn on the projector by pressing the button on the projector keypad or remote control.

A start up screen will display in approximately 10 seconds and the Power LED will be flashing blue.

Note:

The first time the projector is turned on, you will be prompted to select the preferred language, projection

orientation, and other settings.

Powering off

Turn off the projector by pressing the button on the projector keypad or the button on the remote

control.

The following message will be displayed:

Power Off

Press power key again.

Press the or button again to confirm, otherwise the message will disappear after 15 seconds.

When you press the or button for the second time, the projector will shut down.

The cooling fans will continue to operate for about 10 seconds for the cooling cycle and the Power

LED will flash blue. When the Power turns solid red, this indicates the projector has entered standby

mode. If you wish to turn the projector back on, you must wait until the cooling cycle has finished and

the projector has entered standby mode. When the projector is in standby mode, simply press the

button again to turn on the projector.

Disconnect the power lead from the electrical outlet and the projector.

Note:

It is not recommended that the projector is turned on immediately, right after a power off procedure.

Summary of Contents for GT1090hdr











































































Search results

Summary of Contents for GT1090hdr

Reviews:

Related manuals for GT1090hdr

Brands by name

Popular brands

Optoma GT1090hdr, User Manual

Search results

Summary of Contents for GT1090hdr

Reviews:

Related manuals for GT1090hdr

Brands by name

Popular brands