Rev. 01
Company Confidential Optoma_______________________ Delta____________
39
2007/06/13
Step 3:
Make sure the USB cable is firmly attached between projector and computer; the power switch is in
ON position (if the projector got hardware power switch) and projector is in STAND BY mode.
Press
<
Down
>, <
Up
>, <
Right
>, <
Up
>
key in sequence on keypad (DP2601/2618/3618 series) or IR remote
controller (DP3602 series)
。
The power and lamp LED will blink and the Flash-Tool mode will be enabled.
.
Step 4:
Press “Choose” button to locate the new firmware which can be downloaded from website (for example:
DP3635-JAXX-DPD0A.img). Select the candidate .img file and either double click it or press the “Open” button to
load the file.
Press “Choose” to select file
Projector information
Note:
The Windows hardware wizard will pop up if the USB device driver is not installed. Just select
the recommended options and let Windows Wizard do it automatically…
Use img file type for
firmware binary data