EN-44
Audio Input
Select audio input sources.
Advanced
Logo
Use this function to set the desired startup screen. If changes are made they
will take effect the next time the projector is powered on.
Default: The default startup screen.
Neutral: Neutral startup screen.
User: "User" is the screen that you captured.
Logo Capture
Capture the current projection screen as a start up screen.
Closed Captioning
Use this function to set the desired startup screen. If changes are made they
will take effect the next time the projector is powered on.
Off: select “Off” to turn off the closed captioning feature.
CC1:CC1 language: American English.
CC2:CC2 language (depending on the TV channel of the user):Spanish,
French, Portuguese, German, Danish.
Network
LAN Settings
Allow you to configure the wired LAN settings.
Network Status: Display the network connection status.
MAC Address: a read-only display of MAC Address.
DHCP: This protocol automatically assigns IP Addresses to networked
devices.
On: Assign an IP address to the projector from an external DHCP
server automatically.
Off: Assign an IP address manually.
IP Address: Select an IP address.
Subnet mask: Select subnet mask number.
Gateway: Select the default gateway of the network connected to the
projector.
DNS: Select DNS number.
WLAN Settings
Allow you to configure the wireless LAN settings.
WLAN: Turn on or off wireless LAN function.
Network Status: Display the network connection status.
