26 English
Phase
:
Synchronize the signal timing of the display with the graphic card. If the
image appears to be unstable or flickers, use the Phase to correct it. This is a fine
adjustment.
Note:
The Phase can be adjusted only in VGA mode.
Display
The Display menu allows you to modify the display settings, such as keystone,
projection, auto focus, and manual focus.
Display
On
Auto Keystone
Keystone
Projection
Select
Exit
Enter
Auto Focus
On
Manual Focus
Auto Keystone
: Select
On
to
automatically adjust image distortion caused by tilting
the projector.
Note:
The Auto Keystone function can be only used to adjust the image distortion vertically.
Keystone
:
Adjust image distortion caused by tilting the projector (+/-40 degrees).
Note:
If you adjust the keystone degree manually then the Auto Keystone function will be
automatically switched off.
Projection
:
Select the projection mode, depending upon how the projector is
mounted.
y
Auto Keystone
: On
No reverse
Left/ Right reverse
y
Auto Keystone
: Off
No reverse
Left/ Right reverse
Up/ Down reverse
Up/ Down and Left/ Right reverse
Auto Focus
:
Select
On
to
automatically adjust the image focus.
Manual Focus
:
Adjust the image focus manually when Auto Focus option is off.
