24 English
Using the On-Screen Display
1. The projector has a multi-language On-Screen Display (OSD) Menu that can be
displayed with or without an input source.
2. Press the
Menu
button on the control panel or the remote control to enter the Main
Menu.
3. To select an option, press the
or
buttons on your projector’s control panel or
remote control.
4. Use the
or
buttons on the control panel or remote control to adjust the
settings.
5. To exit the OSD, press the
Menu
button directly on the control panel or the remote
control.
Main Menu
The Main menu allows you to select the input source, adjust the volume, select the
display mode, and configure the brightness, contrast, image, display, and setup
settings.
Input Source
Main
VGA
Volume
Display Mode
Brightness
Contrast
Image
Display
Setup
PC
Select
Exit
Enter
Input Source
:
Select your projector’s input source. The options are:
VGA
,
HDMI / MHL
, and
Media
.
Volume
:
Adjust the volume.
Note:
Audio output is not supported in VGA mode.
Display Mode
:
Optimize the display image. The options are:
Bright
,
PC
,
Cinema/
iDevice*
,
Photo
, and
ECO
.
Note:
*The
iDevice
option replaces the
Cinema
option if the input source is
HDMI
and the
iDevice
option (
Main > Setup > Advanced
) is enabled.
Brightness
: Adjust the brightness of the image.
Contrast
: Adjust the display contrast.
User Controls
