Optoma DLP ZU1700, User Manual

Page: 116 / 120

English 116
ADDITIONAL INFORMATION
Other RS232
Response
Other Items
Power Off ~XX00 0 F ~XX124 1 F O k 0
Power On ~XX00 1 F ~XX124 1 F O k 1
Re-Sync ~XX01 1 F
Off ~XX02 0 F ~XX355 1 F O k 0
On ~XX02 1 F ~XX355 1 F O k 1
Unfreeze ~XX04 0 F
Freeze ~XX04 1 F
To Emitter ~XX232 0 F
To Next Projector ~XX232 1 F
3D Frame Delay 1~200 ~XX233 1~nnn F
2D ~XX130 1 F O k 0
3D ~XX130 1 F O k 1
Standby Mode I N F O 0
Warming up I N F O 1
Cooling Down I N F O 2
Out of Range I N F O 3
lightsource Fail ( LED Fail) I N F O 4
Thermal Switch Error I N F O 5
Fan Lock I N F O 6
Over Temperature I N F O 7
LightSource Hours Running Out I N F O 8
Cover Open I N F O 9
lightsource Ignite Fail I N F O 10
Format Board Power On Fail I N F O 11
Color Wheel Unexpected Stop I N F O 12
Over Temperature I N F O 13
FAN 1 Lock I N F O 14
FAN 2 Lock I N F O 15
FAN 3 Lock I N F O 16
FAN 4 Lock I N F O 17
FAN 5 Lock I N F O 18
LAN fail then restart I N F O 19
LD lower than 60% I N F O 20
LD NTC (1) Over Temperature I N F O 21
LD NTC (2) Over Temperature I N F O 22
High Ambient Temperature I N F O 23
System Ready I N F O 24
I N F O 25
FAN 6 Lock I N F O 26
FAN 7 Lock I N F O 27
FAN 8 Lock I N F O 28
FAN 9 Lock I N F O 29
FAN 10 Lock I N F O 30
FAN 11 Lock I N F O 31
FAN 12 Lock I N F O 32
FAN 13 Lock I N F O 33
FAN 14 Lock I N F O 34
Green/Normal ~XX155 1 F O k 1
Orange/Notice ~XX155 1 F O k 2
Red/Warning. About to trigger shutdown ~XX155 1 F O k 3
Green/Normal ~XX159 1 F O k 1
Orange/Notice ~XX159 1 F O k 2
Fan Status Level
Freeze
3D Sync Out
Output 3D state
System Auto Send
System Temperature Level
AV Mute
Read Command
Command Command Response
CMD
sp
ac
e
Set Para.
Level 1 Level 2 Level 3
Write Command
Pass Fail CMD
sp
ac
e
CMD Value Fail
Note: Some commands are not supported, it’s depends on models
Note:
Some commands are not supported, it depends on models
.
Other RS232