Installation Guide
HDBV3100, HDBV3090, HDBV3080
Installation Guide
3
For more information, please visit our website at:
http://www.optomausa.com/BigVizion
. Unpacking of Base Unit and Components
Step 1:
Locate Box 2.
Refer to Figure -3: The Unpacking Diagram
.
Step :
Remove the screws with red washers, and remove the lid on the crate.
Box 2 contains the following:
• Two mirror stay arms
• Two base hangers
• Two stabilizer arms
• One projector and component base
• One projector light hood
• Two gage alignment blocks
• Twelve 5/16"-18 x 3/4" bolts and nuts
See Figure -: Box Detail
Step 3:
With two people, carefully remove the base unit.
Note that the two wooden blocks are used to prevent the base unit from moving during shipment.
Step :
Remove the screws with red washers that hold the wooden blocks in place.
Step :
Lift the base unit out of the crate and set it aside on a smooth surface.
