PM-212 INSTRUCTION MANUAL
7
Charge the battery pack fully before storing PM 212 for a long period. The
batteries will lose its charge during storage.
If you are not going to use the PM 212 for long period, charge the battery
pack once every six months.
The battery pack is a consumable. Repeated charging and discharging
degreases battery pack life. Please contact OPTOKON for battery pack
replacement.
To extend battery pack life it is recommended that batteries be completely
drained before re-charging – battery refresh. Otherwise the batteries lose its
ability to fully recharge
7.2 Instrument care
During storage and transport keep the instrument in its carry case to protect
against crushing, vibration, dust and moisture.
Where possible keep the instrument away from strong sunlight.
Clean the instrument housing using alcohol or other cleaning agents. Acetone or
other active solvents may damage the case.
The instrument is resistant to normal dust and moisture, however it is not
waterproof. If moisture does get into instrument, dry it out carefully before
using it again.
7.3 Optical connector care
Cleanliness will affect the performance of an optical fiber system.
All connectors and fiber end faces need to be clean prior to testing.
Clean all connectors, adapters, and attenuators before making any connections.
Use appropriate optical cleaning supplies to keep connectors and adaptors free
from contamination.
The following cleaning materials are recommended and can form part of your
cleaning kit:
- Lint-free laboratory wipes.
- Isopropyl alcohol in pressurised dispenser
- Lint free pipe cleaners
- Clean, dry, oil-free compressed air
Battery status