
EDFA optical amplifier – user manual
58
TS
{sp}[1,2,A]{cr}
Get TEC Temperature.
Example usage:
TS{sp}1{cr}
Reports the minimum submount temperature, the operating set point, and the
maximum submount temperature of laser diode 1.
Reply is in the form:
LASER1:{sp}25.0{sp}C{cr}
Signifying that the laser 1 has a submount temperature of 25 C.
Example usage:
TS{sp}A{cr}
Reports the operating set point temperature of all laser diodes.
Reply is in the form:
ALL:{sp}25.0{sp}25.0{sp}C{cr}
The range for the TEC temperature is: 15.0 C to 35.0 C.
V
{cr}
Vendor/Device
Get the vendor/device and the software release version. The answer is in the form : vendor (8
digits), vendor’s module name, amplifier version, Hardware version, software version, firmware
version, serial number (10 digits), vendor’s part number (11 digits), module serial number (10
digits), date of production (DD/MM/YYYY)
Example usage :
V{cr}
Reply is in the form:
Vendor{sp}={sp}HIGHWAVE{cr}
Module{sp}={sp}2in1{sp}EDFA{cr}
AW{sp}Ver{sp}={sp}1{cr}
HW{sp}Rev{sp}={sp}A{cr}
SW{sp}Ver{sp}={sp}1.01{cr}
FW{sp}Ver{sp}={sp}1.01{cr}
Ser{sp}Num{sp}={sp}1010350001{cr}
Cat{sp}Num{sp}={sp}1*4922{cr}
Prod{sp}Date{sp}={sp}12/12/2003{cr}