1. Safety requirements
•
All safety instructions must be followed.
•
All rules and regulations concerning the safe operation of
lasers must be known and applied while installing and
operating motorised rotator.
•
Even when wearing safety glasses avoid eye contact
with direct or scattered laser light while assembling,
installing and operating the device.
•
The device should never be exposed to dirt, dust or
moisture.
•
Before any operation make sure the device is installed
correctly and well adjusted and all cover stickers are
removed.
•
Protective measures should be considered if necessary.
•
Electrical safety requirements must be complied while
operating this device.
CAUTION!
High laser output power may damage or destroy
optical elements.
CAUTION!
The device is meant to be used with a
collimated beam. Users take full responsibility when using
the device with a highly converging beam.
CAUTION!
Before increasing laser power make sure the
device is aligned and there is no beam cut. It may damage
optical elements.
4
INPUT
COVER STICKERS MUST
BE REMOVED BEFORE USE
OUTPUT
!
!