18
8
．
How to Configure the Wireless Communication Settings
8.1 Connect without Authentication
1. Use the universal menu book to set the scanning options and read options of the scanner.
・
This operation will not be necessary if you would like to use the scanner with the default settings.
2. Use this instruction manual to set the communication settings.
・
Scan the menu barcode “Connect to PC”. (The trigger connect option will be enabled.)
・
Scan the numbers and characters of the 12-digit Bluetooth device address.
3. Establish connection with the Bluetooth device as follows:
・
Scan a 12-digit Bluetooth device address
・
Press trigger key for the set duration.
・
Scan “Manually connect” menu barcode [+-CONN-+].
4. The LED of the scanner blinks green light and make connection.
5. Once the scanner makes connection successfully, the LED turns solid green and the scanner sounds a buzzer.
・
If the scanner fails in making connection, the LED of the scanner blinks red light and the scanner sounds a
warning buzzer. *
6. You will be able to scan barcodes.
7. You can disconnect the Bluetooth communication as follows:
・
Scan “Manually disconnect” menu barcode [+-DISC-+].
・
Press trigger key for the set duration.
8. The LED of the scanner turns solid red and the scanner sounds a warning buzzer when it disconnect Bluetooth
connection.
Notes:
* Please make sure that the authentication is disabled.
* Please confirm the Bluetooth device address.
Summary of Contents for OPI-4012
Page 25: ...24 Menu Barcodes ...
