YG2 / YS2
9 / 21
Rev. 2.3
Front Panel YG2
Link 1 LED:
Communication is established via Optocore LINK 1
Master LED:
Indicates the Word Clock Master unit
Link 2 LED:
Communication is established via Optocore LINK 2
Uplink LED:
There is other device with physical Ethernet port enabled on the network
USB LED:
USB connection for remote control and update via PC
Green: Indicates data activity
USB/RS232/REMOTE:
D-Sub-9 plug containing following interfaces:
RS232 port for remote control and update via PC
USB port for remote control via PC
2 x RS422 ports e.g. for Yamaha HA Remote protocol exchange with console
Use the TRI-Y cable, provided with the YG2 card. See chapter “Connection
Tables” for detailed pin out. For updating via PC a standard RS232 cable is
sufficient.
LINK 1:
Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP multimode transceiver included, singlemode transiver option available
on demand)
LINK 2:
Full-duplex, full bandwidth LC-type optical interface for Optocore transmission
(SFP multimode transceiver included, singlemode transiver option available
on demand)
SUB:
RJ45 port for connection towards the YS2 cards “SUB” port with CAT5 cable
LAN:
100 Mbit RJ-45 Ethernet interface
