MOUNTING AND CONNECTING THE CONTROLLER
SNAP-LCSX AND LCSX-PLUS Installation Guide
21
DIN-RAIL MOUNTING
DIN-rail mounting requires an adapter clip, part number
SNAP-PSDIN (not included).
For DIN-rail mounting, remove the four screws that fasten
the panel mounting base plate to the controller.
Do not
lose screws.
Remove the base plate.
Use the four screws to fasten the DIN-rail adapter clip to
the controller.
CONNECTING THE CONTROLLER TO REMOTE I/O
The controller fits into the SNAP system as illustrated below:
Optional DIN-rail
adapter clip
