G4LC32 User’s Guide
The factory default HOST PORT is COM0. Make your selection and press
ENTER
to accept the change.
ASCII - Binary Mode
The next display you see will resemble:
ASCII - Binary Mode
Binary Selected
Use the left/right arrow keys to select BINARY or ASCII communication mode for the Host port. The factory default
is BINARY mode. Press
ENTER
to accept your selection.
Baud Rates
COM Port Baud rates are the next group of settings displayed.
BAUD RATE
COM0:
38.4 K
Select the correct baud rate for each COM port. The factory default COM port baud rates are:COM0 = 38.4 KBd and
COM1 through COM3 = 115.2 KBd. Use the left/right arrow keys to make your baud rate selection and press
ENTER
to accept.
Repeat the process for each COM port.
Baud rate choices are:
300
600
1,200
2,400
4,800
9,600
19.2K
38.4K
76.8K
115.2K
Address
The next display shows the current address setting in the bottom left corner.
PROCESSOR ADDRESS
MUST BE BETWEEN
1 AND 255
1
CONFIGURATION
3-8
Summary of Contents for G4LC32
