G4LC32 User’s Guide
After a very short delay, a display similar to the following will appear:
NEW LEVEL3 PASSWORD?
ENTER FOR NO CHANGE
000000
The above password will vary. If you have previously changed the password for LEVEL 3, then that password will be
displayed. You may now enter a new password or press the
ENTER
key if you do not want to change the password. You
can use the right/left arrow keys to move the cursor if you want to skip over some digits without changing them.
Press one of the numeric keys 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 to enter a numeric digit. After the password has been
changed, press the
ENTER
key. You must not forget your new password. A display similar to the following will appear:
NEW LEVEL2 PASSWORD?
ENTER FOR NO CHANGE
000000
Press the
ENTER
key if you do not choose to change the password. If you choose to change the LEVEL 2 password, then
enter it from the keyboard. After the LEVEL 2 password has been entered, then press the
ENTER
key to accept the
change. A display similar to the following will appear:
NEW LEVEL1 PASSWORD?
ENTER FOR NO CHANGE
000000
Again, just press the
ENTER
key if you do not choose to change the password. If you choose to change the LEVEL 1
password, then enter it from the keyboard. After the LEVEL 1 password has been entered, then press the
ENTER
key
to accept the change.
Host Port
Next, you will see a display resembling the following:
SELECT HOST PORT
COM0:
Press the
ENTER
key if you do not choose to change the HOST PORT. If you choose to change the HOST PORT, then
press the left/right arrow keys to select a different port. Your choices are:
COM0:
COM1:
COM2:
COM3:
ARCNET
CONFIGURATION
3-7
Summary of Contents for G4LC32
