Optivisus DKM01B, Manual

Page: 12 / 23

12
PARTY Set Party Number
0 ~ 99 (Party No.)
? (display setting)
OK = Setting successful
ERROR = Setting fail
OSD_ON
Display
character
on
screen 60 seconds
Character (alphabet
and numbers)
OK = Setting successful
ERROR = Setting fail
OSD_OFF Turn off the OSD
0 ~ 60000 (Delay
time , based on ms)
OK = Setting successful
ERROR = Setting fail
SCREEN Turn on/off screen
ON
OFF
OK = Setting successful
ERROR = Setting fail
REBOOT System reboot N/A SYSTEM REBOOT
※
The maximum of OSD_ON is 30 characters, not support comma sign
「
,
」
, some characters must use \x##
format to display, ## means the characters number in ASCII 16 code
e.g.: \x0a is change to next line, \x28 is ( brackets sign, \x22 is
“
sign
e.g.:
>CMD_M1234> CHANNEL 12 ( Set receivers which last 4 digits MAC Address is 1234 to Channel 12 )
<ACK_M1234< OK (Receiver which last 4 digits MAC Address is 1234 response OK)
>CMD_D123> BUTTON OFF
(Turn off the button function of the receiver which Device number is 123)
<ACK_D123< OK (Receiver which Device number is 123 response OK)
>CMD_P5> !IR_KEY 31
All receivers which Party number is 5 send IR Key 31 and response.
<ACK_M0219< OK Receiver which last 4 digits MAC Address is 0129 response OK
<ACK_M021B< NO LEARN Receiver which last 4 digits MAC Address is 021B response NO LEARN
>CMD_ALL> !OSD_ON Hello! \x28123\x29 \x22ABC\x22 Show
「
Hello! (123) “ABC”
」
to all monitor and
send response
<ACK_M0219< OK
Receiver which last 4 digits MAC Address is 0129 response OK
<ACK_M021B< OK Receiver which last 4 digits MAC Address is 021B response OK
<ACK_M021C< OK Receiver which last 4 digits MAC Address is 021C response OK
>CMD_ALL> OSD_OFF 10000 All receiver turn off OSD after 10 seconds