of IR LED are matched with irradiation distance of camera. With different zoom,
IR LED at its best control and adjust power automatically. When select close, start
IR LED will depends on illumination set by user and it can’t adjust automatically.
It is suggest selecting open zoom match.
G1
：
Illumination of light group 1
Light group 1 is outside lane long distance IR LED, press “Iris on” to set
illumination value.
H1
：
Illumination of light group 2
Light group 2 is centre circle medium distance IR LED, press “Iris on” to set
illumination value.
I1
：
Illumination of light group 3
Light group 3 is inside lane short distance IR LED, press “Iris on” to set
illumination value. When close zoom match, user should adjust irradiation
distance by himself.
Note: When open zoom match, it can’t adjust illumination of Light group 1,
Light group 2 and Light group 3 manually.
B
：
STANDBY SETTINGS
Move cursor to STANDBY SETTINGS and press “Iris on” to submenu of STANDBY
SETTINGS.
A1
：
STANDBY TIME
Move cursor to STANDBY TIME and press “Iris on” to setup time, move
22
