DVR User
’s Manual
59
Video Source Selection
Follow the same procedure if more UTP Cameras to CH2, CH3, or CH4 will be installed.
NOTE:
Do
NOT
insert both BNC and UTP video sources to the same
channel simultaneously, or the video will not function correctly and it may cause
the video to look like the figure below. For instance, if a UTP Camera is already
installed to channel 1, do not install another camera to the BNC port of channel 1.
Bad Video Output
Step 3
:
Plug in the power adapter to the DVR, and the DVR will start to boot. The installation is
complete.
NOTE
: The UTP Board provides power up to 5.5W. If the power consumption of
the camera is more than 5.5W, the UTP Board will start beeping.
NOTE
: The length of each UTP cable should
NOT
exceed 300 meters (or 984 feet), or
it may cause loss or weakening of signal. The following table shows performance at
different distances.
Distance
Meters / Feet
UTP-Converter
Power Output (W)
Video Quality
0
5.526
Excellent
100 / 328
5.256
Excellent
200 / 656
5.04
Good
300 / 984
4.77
Good
Summary of Contents for H.264 DVR System
Page 1: ...H 264 DVR system H 264 DVR System User s Manual...
Page 2: ...DVR User s Manual 1...
Page 15: ...DVR User s Manual 14...
Page 64: ...DVR User s Manual 63...