Optiview H.264 DVR System, User Manual, Page: 48 / 68

DVR User
’s Manual
47
5.2.2.2 Software Upgrades
If a new version of the remote monitoring software is available on the DVR,
upgrade will be prompted while accessing the unit. Follow the steps to
upgrade the software.
The message as the above figure will be prompted. Click <Yes> to accept
version upgrade.
Start the IE again and enter the IP address of the DVR in the Address bar
of the browser; or if the unit address is set as a Favorite site, click the
Favorites entry for the unit.
When the software is completely downloaded and installed, the Login
Screen will be displayed.
5.3 Basic Operation for Monitoring Remotely
When a DVR is successfully connected, the main window of the Central
monitoring software will display as shown below. The connected cameras of
the DVR will be listed on the left and an array of camera output windows will
display on the right of the main window.
Formatted:
Indent: Left: 6 ch, Bu
Level: 1 + Aligned at: 0" + Tab after:
0.29" + Indent at: 0.24"
Formatted:
Indent: Left: 6 ch, Bu
Level: 1 + Aligned at: 0" + Tab after:
0.29" + Indent at: 0.24"
Formatted: Font: (Default) Arial