4CH STANDALONE
DVR
8、RECORD CONTROL
(1)Press
to start recording.
White
indicates recording.
(2) During recording, the mark ” * ” appears in status of overwriting
9、NTSC / PAL SYSTEM SETUP
(1)
Replace the jumper to change system.
(2) J1 as follows:
PAL
NTSC
J1
11
.
4CH Recording Hours on 80GB Hard Drive
*
Thereinafter a rough estimate a table for reference only, recording data
quantity can follow an image a variation a rate somewhat different.
(1)EVENT :
Press
choose one period, then press
to play.
(2)DATE / TIME :
The signal ”>” goes up to the “HARD DRIVER: MASTER”. Press
to select items. Use
select to change data, Then press
to play.
(3)PLAYBACK :
*
Press
to speed forward. Continue to press
and show
x2、x4、x8 multiple playing.
*
Press
to show x2 multiple back motion.
*
Press
to pause
.
*
Press
to stop.
-12-
Strike the button "pause" five times continually, "L" pops up on the left, to enable .
Keypad lock-up feature.
Strike the button "pause" five times again, "L" not found, to unlock keypad.
10.Keypad Lock-up Setup:
