IR Speed Dome Installation Manual
24
3.1.2
Corner Mounting Instructions
Steps:
1.
Drill four holes in the corner. Insert M6 expansion screws (not supplied) into the holes.
2.
Pass the power cord, video cable and control cable through the opening of the corner adapter.
Note:
Make sure the cables are long enough. For outdoor applications, you can use sealant to seal
the cable openings for waterproofing.
3.
Align the four holes of the corner adapter with the four expansion screws in the corner.
4.
Screw the nuts and washers to the expansion screws
to secure the corner adapter.
Figure 3-12
Install the Corner Mount
5.
Position the wall mount to the corner adapter.
6.
Insert the hex screws with the spring washers through the wall mount and the gaskets, and
tighten them to the corner mount.
Nuts and
Washers
