Support Microsoft CHAP Version 2
Select this check box if you are commu-
nicating with a peer that uses Microsoft CHAP Version 2 authentication
protocol.
4.1.4
Internet Protocol Settings
Select one of the following Internet protocol options from the
Internet protocol
drop down menu:
• Obtain an IP address automatically
• Use the following IP address
Please note that according to the selection you make in the
Internet protocol
drop down menu, the screen will refresh and display relevant configuration
settings.
Obtain an IP address automatically
Your PPP connection is configured by de-
fault to obtain an IP address automatically. You should change this con-
figuration in case your service provider requires it.
The server that assigns the GlobeSurfer 3G with an IP address, also as-
signs a subnet mask. You can override the dynamically assigned subnet
mask by selecting the
Override subnet mask
and specifying your own mask
instead.
Figure 4.5: Internet Protocol Settings – Automatic IP
Use the following IP address
Your WAN connection can be configured using
a permanent (static) IP address. Your service provider should provide
you with this IP address, subnet mask and the default gateway IP ad-
dress.
Figure 4.6: Internet Protocol Settings – Static IP
4.1.5
DNS Server
Domain Name System (DNS) is the method by which website or domain names
are translated into IP addresses. You can configure the connection to auto-
matically obtain a DNS server address, or specify such an address manually,
according to the information provided by your ISP.
24