• Select the
System
and
Security
notification levels in the
System notify level
and
Security notify level
combo boxes respectively.
6.13.2
Advanced PPTP Server Settings
To configure advanced PPTP server settings click the
Advanced
button on the
Point-to-Point Tunneling Protocol (PPTP)
screen (see figure
6.38
). The advanced
settings will appear (see figure
6.41
). This screen enables you to configure the
following:
•
Enabled:
Enable or disable the PPTP server.
•
Max. idle time to disconnect in seconds:
Specify the amount of idle time
(during which no data is sent or received) that should elapse before the
GlobeSurfer 3G disconnects a PPTP connection.
•
Authentication/Encryption required:
Select whether PPTP will use au-
thentication, encryption, or both.
•
Allowed authentication algorithms:
Select the algorithms the server may
use when authenticating its clients.
•
Allowed encryption algorithms:
Select the algorithms the server may
use when encrypting data.
•
Remote address range:
Specify the range of IP addresses remote users
can use to access your local network.
Please note that the client settings must be in tune with the server settings.
Figure 6.41: Advanced PPTP Server Settings
6.13.3
Advanced PPTP Client Settings
The PPTP connections are displayed in the
Point-to-Point Tunneling Protocol
(PPTP)
screen (see figure
6.38
). To configure advanced PPTP client settings
170