Optimus UMX-CC Operating Instructions Manual Download Page 18

 

 

UMX-CC version 1.0 

18

 

AUDIO IP MANAGEMENT CARD 

FOR UMX-02/0 MODULAR MATRIX 

UMX-CC 

R&D Department 

9.

 

GUARANTEE 

 

1. GUARANTEE CERTIFICATE 

1.  OPTIMUS S.A. guarantees that its products are free from material and 

manufacturing defects when they are first delivered to the purchaser. 
2.  In  accordance  with  the  conditions  outlined  here,  OPTIMUS  S.A. 
guarantees  its  products  for  two  (2)  years  from  the  date  on  which  the 
purchaser  acquires  the  product.  If,  within  this  guarantee  period,  defects 
appear  which  are  not  due  to  factors  outlined  in  section  2,  OPTIMUS  S.A. 

shall  replace  or  repair  the  unit  using  equivalent,  new  or  reconstructed 
replacement  parts,  as it  deems fit.  If  replacement  parts  are  applied  which 
improve the unit, OPTIMUS S.A. reserves the right to charge the client for 
the additional cost of these components. 
3.  No guarantee benefits shall be provided other than those cited here. 
4.  In  order  to  claim  the  guarantee  rights,  it  shall  be  an  essential 
requirement  to  present  the  original  purchase  invoice  or  the  guarantee 
certificate. 

2. GUARANTEE PROVISIONS 

1.  In the event that the product had to be modified or adapted to comply 
with local requirements concerning technical specifications or safety, and if 
the  country  in  question  is  not  the  country  for  which  the  product  was 

originally  designed  and  manufactured,  defects  are  not  considered  to  be 
material  or  manufacturing  defects.  Furthermore,  the  guarantee  does  not 
cover  the  execution  of  these  modifications  or  adaptations,  regardless  of 
whether or not they have been carried out correctly. 
Nor shall OPTIMUS S.A. be responsible for any costs under this guarantee 

for these types of modifications. 
2.  The  guarantee  shall  not  entitle  the  purchaser  to  inspection  or  free 
maintenance  or  repair  of  the  unit,  particularly  if  the  defects  are  due  to 
inappropriate  use.  Nor  do  the  guarantee  rights  cover  defects  in  wearing 

parts that become worn as a result of normal wear and tear. Wearing parts 
are, in particular, potentiometers, switches/keys, and similar parts. 
3.  The guarantee does not cover defects in the equipment unit caused by: 

 

Abuse  or  incorrect  use  of  the  unit  for  purposes  other  than  those  for 

which  it  is  intended,  in  non-compliance  with  the  service  and 
maintenance  instructions  specified  in  the  Manual  and/or  Technical 
Instructions for the unit. 

 

Connection or use of the product in a manner that does not correspond 

to the technical or safety requirements of the country in which the unit 
is used. 

 

Installation  in  conditions  other  than  those  indicated  in  the  Manual 
and/or Technical Instructions. 

 

Deficiency  or  interruptions  in  the  electricity  supply  or  installation 

defects which imply use in abnormal conditions. 

 

Damage  caused  by  other  equipment  units  that  are  connected  to  the 
product. 

 

The use or installation of Software (programmes), interfaces, parts or 

supplies not provided and/or not authorised by OPTIMUS S.A. 

 

Failure to use the original packaging for transportation. 

 

Damage  caused  by  force  majeure  or  other  causes  not  attributable  to 
OPTIMUS S.A. 

4.  The following elements are not covered by this guarantee: 

 

All  plastic  surfaces  and  all  parts  exposed  to  outdoor  conditions  which 
have  been  scratched  or  damaged  as  a  result  of  normal  or  abnormal 
use. 

 

Breakages,  knocks,  damage  due  to  a  fall  or  scratches  caused  by 

moving the unit in any way. 

 

Damage  caused  by  tests,  use,  maintenance,  installation  or 
inappropriate  adjustments,  or  as  a  result  of  any  alteration  or 
modification  of  any  kind  not  carried  out  by  a  Service  Authorised  by 

OPTIMUS S.A. in compliance with this guarantee. 

 

Damage to persons or property that might be caused by the improper 
use of the equipment, including lack of maintenance. 

5.  The guarantee shall not be valid whenever the following is observed: 

 

Amendments  or  corrections  made  to  the  details  of  the  guarantee 
certificate or purchase invoice. 

 

Failure to produce the original invoice or the absence of a date on this. 

 

Absence of the serial or batch number on the equipment. 

6.  In  the  case  of  personal  computers,  the  guarantee  will  not  cover  the 
elimination  of  computer  viruses,  the  restoration  of  programmes  damaged 

by these or the reinstallation of the disk following its deletion. 

7.

 

The  rights  of  this  guarantee  are  invalidated  if  the  product  has  been 

repaired or opened by staff unauthorised by OPTIMUS S.A. or by the client 
himself. 
8.  If  OPTIMUS  S.A.  were  to  establish  before  the  client  that  the  damage 
affecting the unit does not entitle a claim to be made under the guarantee, 
the  costs  of  checking  the  equipment  incurred  by  OPTIMUS  S.A.  shall  be 
borne by the client. 
9.  Products  not  covered  by  the  guarantee  shall  only  be  repaired  once 
payment  has  been  effected  by  the  client.  In  the  event that the  guarantee 
rights do not apply, OPTIMUS S.A. shall duly inform the client. If, within a 
period  of  6  weeks  from  this  communication,  no  written  repair  order  is 
received from the client confirming acceptance of the costs, OPTIMUS S.A. 

shall return the unit in question to the client. In this case, the transport and 
packaging costs shall be invoiced separately and payment shall be made on 
delivery.  In  the  event  that  a  repair  order  is  sent  by  the  client,  confirming 
that he assumes the costs of repair, the transport and packaging costs shall 

be invoiced additionally, and also separately. 
10.  If  the  equipment  needs  to  be  transferred  to  the  Authorised  Service 
Centre, transportation shall be effected by the responsible party according 
to the guarantee, who will also bear the freight and insurance costs. 
11.  In  the  event  of  a  defect,  OPTIMUS  S.A.  guarantees  that  the  repair 
and/or replacement of parts so that the unit operates correctly will be made 
within  a  period  of  no  more  than  30  days.  Nevertheless,  OPTIMUS  S.A. 
would like to clarify that the normal period does not exceed 30 days. 
12.  All  parts  or  products  replaced  as  part  of  the  guarantee  services  shall 

become the property of OPTIMUS S.A. 

3. TRANSFER OF GUARANTEE  

The guarantee is solely awarded to the original purchaser (principal client) 
and is not transferable. With the exception of OPTIMUS S.A., no third party 

(dealers,  etc.)  is  authorised  to  award  additional  guarantees  on  behalf  of 
OPTIMUS S.A. 

4. CLAIMS FOR DAMAGE 

In  the  event  that  OPTIMUS    S.A.  cannot  provide  a  suitable  guarantee 

service,    the  purchaser  shall  not  be  entitled  to  claim  any  indemnity  for 
damages  arising.  The  responsibility  held  by  OPTIMUS  S.A.  is  limited  in  all 
cases to the invoicing price of the product. 

5.  RELATION  WITH  OTHER  GUARANTEE  RIGHTS  AND  NATIONAL 

LAW 

1. This guarantee does not affect the rights of the purchaser with respect to 
the vendor arising from the contract of sale accomplished. 
2. These conditions of the guarantee provided by OPTIMUS S.A. are valid as 
long as they do not contradict the corresponding national law on guarantee 

provisions. 
3.  OPTIMUS  S.A.  guarantees  that  this  product  complies  with  the  safety 
regulations in force in the country. 
 
THIS LIMITED GUARANTEE DECLARATION IS THE EXCLUSIVE GUARANTEE 
OFFERED  BY  OPTIMUS    S.A.    ALL  OTHER  EXPLICIT  OR  IMPLICIT 
GUARANTEES  ARE  EXCLUDED,  AND  THIS  ALSO  APPLIES  TO  GUARANTEES 
OF  MARKETABILITY  AND  SUITABILITY  FOR  A  PARTICULAR  PURPOSE. 

(EXCEPT  WHEN  THESE  GUARANTEES  ARE  REQUIRED  BY  AN  APPLICABLE 
LAW). NO GUARANTEE, EITHER EXPLICIT OR IMPLICIT, SHALL BE APPLIED 
ONCE THE GUARANTEE PERIOD HAS EXPIRED 
 
 
 
 
OPTIMUS S.A. 
After-Sales Service  
C/ Barcelona 101 
17003 - GIRONA 
Tel. 902 151 96  /  972 203 300  
Fax. 972 21 84 13 
e-mail:[email protected] 

CE1999/44/CE 

 

Summary of Contents for UMX-CC



















Reviews: