25
Using the Remote Control
Tape/VCR Section
Before operation:
• Set
AUDIO
•
VCR/TV
to
AUDIO
for a cassette deck or to
VCR/TV
for a VCR.
• For a cassette deck, select
TAPE 2 MONITOR
or
VCR/TAPE 1
.
• For a dual cassette deck, select
DECK 1
or
DECK 2
. If you use a single
cassette deck, press
DECK 2
.
• You must connect the CD player both to your receiver’s CONTROL out
and audio jacks for these functions to work.
Press to start normal play.
Press to play the other side of an auto-reverse cassette deck.
Press to cancel the current function.
ASMS
For a cassette deck, lets you quickly locate and play the
beginning of recorded material during play.
When the tape is stopped, lets you rapidly search forward or
backward to locate a specific section of the tape.
For a VCR, lets you rapidly view a tape either forward or
backward.
DECK 1/DECK 2
Selects Deck 1 or Deck 2 when you use a dual cassette deck
with AUDIO
•
VCR/TV set to AUDIO.
TAPE/VCR POWER
Turns on the connected VCR with AUDIO
•
VCR/TV set to
VCR/TV; turns on the cassette deck with AUDIO
•
VCR/TV set
to AUDIO.
Note: TAPE/VCR POWER does not work with all decks.
– VCR CH +
Moves to the next higher or lower channel with AUDIO
•
VCR/
TV set to VCR/TV.
TV/VCR
Selects between normal TV viewing and VCR input with
AUDIO
•
VCR/TV set to VCR/TV.
TAPE SELECT
Selects cassette 1 to 6 for a multi-cassette changer.
Training the Remote Control
You can use your STAV-3590 remote control instead of the ones for other audio/
video components. To do this, you must first teach your STAV-3590 remote con-
trol the other device’s remote control commands.
You can program the commands on the buttons shown in the illustration. By
changing the position of the
AUDIO
•
VCR/TV
switch, you can program two com-
mands to a single button. However, if you program the upper group of buttons
with the switch set to
AUDIO
, the built-in tuner operations are disabled.
Notes:
• You do not need to turn on the receiver or the other device.
• You might not be able to teach commands from some remotes.
To clear all learned commands from memory, press
TV POWER
,
CD POWER
,
and
TAPE/VCR POWER
at the same time. The
TRANSMIT/LEARN
indicator
flashes four times.
1~2 inches
