
12
Preparing Your Receiver
Using One Remote Control
for More than One Unit
If you also have an Optimus professional series CD player, VCR, or cassette
deck with the OSR mark, you can connect its
CONTROL IN
jack to the receiver
so you can control all of your equipment with a single remote control. You can
also use the other component’s remote control by pointing it at the receiver’s
front panel.
1. Connect each component to the receiver as shown in “Connecting Pro-
gram Sources” on Page 8.
Note: You must connect the audio cables between the receiver and the
other audio accessory to use your receiver’s remote control to control the
accessory.
2. Connect the cable supplied with the CD player, VCR, or cassette deck
between the receiver’s
CONTROL OUT
jack and the other component’s
CONTROL IN
jack.
3. When you want to control more than one other component using the
receiver’s remote control, daisy-chain the
CONTROL OUT
and
CONTROL
IN
connections as shown.
Installing the
Remote Control’s Batteries
The remote control uses two AAA batteries (not included). For the longest bat-
tery life, we recommend RadioShack’s alkaline batteries (Cat. No. 23-555).
1. Press and open the battery
compartment cover.
2. Place two fresh AAA batteries in
the compartment as indicated by
the polarity symbols (+ and –)
marked in the compartment.
3. Replace the battery compartment
cover.
4. Press
RESET
.
Note: When you plug the cable into a
component’s
CONTROL IN
jack, that
component’s remote sensor does not
function.
Cautions:
• Use only fresh batteries of the recom-
mended size and type.
• Always remove old or weak batteries.
Batteries can leak chemicals that can
damage electronic circuits.
Note: If the
TRANSMIT/LEARN
indicator
does not light when you press a button,
replace the batteries immediately. When
you remove the remote control’s batter-
ies, the memory contents are protected
for about 15 minutes. Be sure to install
new batteries within 15 minutes after you
remove the old batteries.
OUT
IN
CONTROL
OUT
IN
CONTROL
Receiver
Remote
Control
Other Component
with OSR Mark
To the CONTROL IN ja
of Another Componen
Having the OSR Mark